Greif Ukraine

Inter Plus Presentation

Nicmas Commercial Offer

Obolon Malt specification

Obolon products presentation

Obolon specification Brewer's Grain

Obolon_Corporation_eng

Our Band saw blades for metal are made from Bi-metallic alloyed steel M42(1.3247) or M51(1.3207).

Technical characteristics of our production:

· The lowest price

· Production of high quality (tooth edge made of HSS)

· Hardness and flexibility at the same time

· Long term saw service

For metal cutting blades(for linear meter):

I would like to pay your attention to the following bimetallic saws:

Lenker M42 – 430 K-O (professional, for little and medium wall tube thickness )

Usage:

· Usual kinds of steel with the strength by the stretching about 1400H/square mm

· Profiles of the non-ferrous metals

· Cutting of the separate blanks and the whole packs

· Tubes and profiles with little or medium wall tube

· Vertical machine tool tin plates

Technical Characteristics:

· Tooth point from the material HSS M42 1.3247

· Variable tooth with 0 degree hook and special group setting cuts the slimmest slit with the lowest vibrations.

· It easily cuts the metal with the short chips/

· Long term of the saw usage and the lowest amortization while cutting.

V-O variable tooth

Lenker M42 – 431 K-VS, K-POS (medium and big size expert)

Usage:

· Usual kinds of steel with the strength by the stretching about 1400H/square mm.

· Non ferrous metals

· Cutting of the separate blanks and the whole packs

· Solid materials of the medium and big sizes

· Heavy-walled tubes

Technical characteristics:

· Tooth point from the material HSS M42 1.3247

· The variable tooth with the positive hook and the special group setting cuts quick and smooth/unrippled slit of the solid materials as well as the heavy-walled profiles and tubes.

V-O – the fore tooth with the positive hook

Lenker M51 – 531 K-PLUS M51 (profiles saws, the steadiest teeth for the solid steel and the medium sizes alloy)

Usage:

· Steel with the strength by the stretching about 1700H/sq.mm.

· Austenitic stainless steel

· Nickel base alloy

· Titanium and the special bronze

· Solid materials of the medium sizes

· Heavy-walled tubes

Technical characteristics:

· Saw tooth point from the material HSS M51 1.3207

· The variable, in twice increased tooth mould with the fore tooth positive

· The tooth point, made from the material HSS M51, has the high resistance according to the vigorous heating and to the amortization, increases saw term service while cutting the hard and the hard-processing materials.

V-POS – the fore tooth with the maximum positive hook

BAND SAWS STANDARD LENKER:

Where to use: sawing of wood

Machine-tool: band sawmills for logs

Profile: 10/30

N – sharpened

ROH – set, sharpened, steeled tooth

RO – set, sharpened, not steeled tooth

Lenker Standard is inexpensive band saws for logs cutting. Raw sawing has high quality combining with low price / cubic meter sawn production. They are produced by LENKER standard steel alloy, which meets the standards for the carpentry industry. Folding blade is rounded and the surface has a grey-blue color . Standard LENKER saws are versatile and perfectly cut any wood, including soft and hard wood, frozen and dry logs. The production technology enables to steel each saw tooth by electromagnetic induction method, which leads to increase in times the saws life term.

Lenker Standard band saws show result of wood cutting 40 cub. meters. Blades can be supplied being set, sharpened, hardened. Blades are supplied in rolls(coils) or welded to the order according to the type of the machine-tool. The hardness of material 42 - 44 HRC(the hardness of steeled tooth is 62-65 HRS).

BAND SAWS HAMMER:

Where to use: sawing of wood

Machine-tool: band sawmills for logs

Profile: 10/30

N – sharpened

ROH – set, sharpened, steeled tooth

RO – set, sharpened, not steeled tooth

HAMMER band saws are manufactured of the German stainless steel that allows to unite strength and flexibility, providing long-term work tool without any cracking that inevitably leads to premature rupture of the blade. 

The blade material has high strength and hardness and provides reliable work operation after multiple regrinding. The folding blade is rounded. This band saw  has increased blade thickness, which improves the straightness of the blade and prevents the appearance of cracks on the saw back, it removes internal stress of the body blade. Rounding provides stroke saw improvement and protects pulley coverage. The saw surface is polished and oiled to prevent corrosion.

The band saws HAMMER show the result of wood cutting 65 cub. meters according to the right operating conditions. Blades can be supplied being set, sharpened, hardened RO and ROH. Blades are supplied in rolls(coils) or welded to the order according to the type of the machine-tool, the hardness of material 45 - 47 HRC(the hardness of steeled tooth is 62-65 HRS).

BAND SAW LENKER PREMIUM

Where to use: sawing of wood

Machine-tool: band sawmills for logs

Profile: 10/30

N – sharpened

ROH – set, sharpened, steeled tooth

RO – set, sharpened, not steeled tooth

Lenker Premium - band saws, made ​​of the stainless German steel by modern technology, which allows to add hardness and flexibility to the saw blade at the same time . Unlike others the band saws Premium can bear twice higher loading.

Saws of this type work perfectly practically with any kind of wood, can bear many grindings and show the best economic efficiency taking in consideration expenses for cub. meter of the sawn wood. Additional induction tooth harding admits to get the following advantages : teeth tips are stayed sharp longer time; they need rare grinding, tooth setting holds longer due to higher metal hardness.

The band saws LENKER Premium show the result of wood cutting 80 cub. meters according to the right operating conditions. Blades can be supplied being set, sharpened, hardened RO and ROH. Blades are supplied in rolls(coils) or welded to the order according to the type of the machine-tool, the hardness of material 47 – 49 HRC(the hardness of steeled tooth is 62-65 HRS).

.

BAND SAW JOINER:

Where to use: sawing of wood in joinery

Machine-tool: vertical joinery band saw

ROH – set, sharpened, steeled tooth

RO – set, sharpened, not steeled tooth

Joiner – narrow band saw (fretsaw) made of the stainless German steel, which allows to add hardness and flexibility to the saw blade at the same time . Unlike others the band saws Joiner can bear twice higher loading.

Operating conditions:

The maximum speed of blade cutting is set by the band saw manufacturer. Usually it fluctuates in the range 20-35 m/s. The general principle spreads : the harder the cutting material, the less speed of the saw.

Blades can be supplied set, sharpened, steeled. Blades are supplied in rolls(coils) or welded to the order according to the type of the machine-tool, the hardness of material 42 – 44 HRC(the hardness of steeled tooth is 62-65 HRS).

THE BAND SAW BLADES FOR WOOD

The band saw blades are used for wood cutting. They are made from the Carbon steel C75Cr1 or D6A steel or Bi-metallic steel.

Our prices are for linear meter:

Lenker  35*1,0  ROH   - 1,28 euro for l/m

Joiner 20*0,7  ROH  - 1,2 euro for l/m

Premium 35*1,1 ROH  - 2,2 euro for l/m

Standard  35*0,9 ROH  - 1,02 euro for l/m

Bimetallic 34*0,9 RO - 3,75 euro for l/m

THE BAND SAW BLADES FOR METAL

The band saw blades for metal are made from Bi-metallic steel M42(1.3247) or M51(1.3207).

The prices are for linear meter:

Lenker K-POS M42  20*0,9  4/6   - 3,36 euro for l/m

Lenker K-POS M42  27*0,9  3/4   - 3,61 euro for l/m

Lenker K-POS M42  34*1,1  2/3   - 5,00 euro for l/m

Lenker K-POS M42  41*1,3  4/6   - 6,39 euro for l/m

Lenker K-POS M42  54*1,6  1,4/2   - 9,12 euro for l/m

Circular saws:

THE ABRASIVE WHEELS

For sharpening band, frame and circular saws we produce grinding wheels  with different technical characteristics, formulation, depending on the material of coordinate. Our grinding wheels are used as the  universal tools and in the automatic machines as well.

THE SUPPORTING ROLLERS

The main advantage of the supporting rollers is high quality. The rollers are underrun by heat treatment, and in the combination with the bearings of well-known manufacturers – their service term is much longer.

Usage:

They are intended to be used at different sawmills, wood working machines.

Types of rollers: 201, 202, 203, 204.

Our web-sites:

www.us.lenker.pro

Our catalogue:

http://lenker.pro/en/equipment-and-tools/

The Company “InterPlus” is the manufacturer and dealer of Lenker production.

Our company  was founded at 2003 and more than 10 years we successfully have been working at the industrial market. We have our representatives in different countries such as Poland, Czech Republic, Belorussia, Russia and Kazakhstan.

We can offer:

· Band saws for wood, plywood, metal and other materials.

· Grinding or setting machines for the band saws.

We can offer the  lowest  prices for our production  that guarantees  the optimal result  for  the cooperation with our company as our band  saws are made from high steel German alloy.

Technical characteristics of our production:

· The lowest price

· Production of high quality (tooth edge made of HSS)

· Hardness and flexibility at the same time

· Long term saw usage

· Each tooth has been steeled by the electromagnetic induction method that leads  to increase in times the saw  life usage.

FORM OF THE COMMERCIAL OFFER

* - позиції, обов’язкові до заповнення. У разі відсутності згаданої інформації запит опрацьовуватися не буде

Разом з заповненою формою надсилаються додаткові презентаційні, інформаційні матеріали тощо в електронній формі, англійською мовою або мовою країни, до якої надсилається пропозиція.

DearSirs!

MynameisIlya Demenyuk , I represent a company PJSC Obolon.

"Weworkeveryday to be the firstandnot to leavethirstyoneson the planet" - motto of ourcompany.

LetmerepresentanOboloncompany - the biggestbrewery in EastEurope. Ourcompanyproducebeer, beer-mix(beerwithfruitssyrups), softdrinks, low-alcoholicdrinks, mineralwaterandbarleymalt, snacks,production of glass containers and PET-preforms, PET bottle recycling, production of binding band. Weexportourgoods in a morethan 40 countries of the world. Wearelookingfor a strongpartnersandwouldbehappy to offerourqualityproducts.

The company "Obolon" ready to suggest the lowestpricesforallproducts of ourproduction. In addition, dependingon the volume of salescompany "Obolon" willprovideyouwithadvertisingproduction, POS materials, informationsupportduring the wholeperiod of cooperation (somesamples in the attachment).

Alsowecansuggestdelivery of ourgoods to the port of countryby 20" or 40" containers.Weready to the flexibleconditions of relationswithourpartnersasmanufacturerfor the bestprofit of bothparts. Weready to supplyhighqualitydrinks to the marketandhope to mutualcooperationbetweenourcompanies.

Videotour to the brewery:http://obolon.ua/eng/press/online/

Ourwebcite : http://obolon.ua/eng/
Pleasedon'teverhesitate to contactmein case of anyquestions: Această adresă de e-mail este protejată de spamboţi; aveţi nevoie de activarea JavaScript-ului pentru a o vizualiza .
Bestregards,
Mr.IlyaDemenyuk

COMMERCIAL OFFER UVENTA

* - позиції, обов’язкові до заповнення. У разі відсутності згаданої інформації запит опрацьовуватися не буде

Разом з заповненою формою надсилаються додаткові презентаційні, інформаційні матеріали тощо в електронній формі, англійською мовою або мовою країни, до якої надсилається пропозиція

Uventa PE

36008, Ukraine, Poltava Komarova st.7

Offer wholesale supplies Honey

The company "Uventa" since 1994 has been producing and exporting carrots, sunflower seeds, coriander, mustard, maize in Europe, America and Asia.
Currently developing trend for exports from Ukraine of bee products, the main of which is the honey.

All our products are researched radiological control and tests in independent public institutions for compliance with the physical and chemical indicators of standards, according to the requirements of Ukrainian State Standard 4497: 2005 "Natural honey." Honey collected from apiaries located in the ecologically clean area of ​​the center of Ukraine, in the Poltava region.

We offer:

• High-quality Ukrainian honey production;

• Approximate volume of supplies min 20 tons for month;

• The first batch - 10 tons;

• Packing is made in metal barrels of 200 liters with inner coating for foods. In addition, at the request of the customer honey can be packaged to any consumer packaging. The price agreed on separately.

We are ready to discuss with you mutually beneficial ways of cooperation

Contact person: Valentin Komlyk
Phone contact: +38 066 506 2827; +38 063 055 6454
E-mail: Această adresă de e-mail este protejată de spamboţi; aveţi nevoie de activarea JavaScript-ului pentru a o vizualiza , Această adresă de e-mail este protejată de spamboţi; aveţi nevoie de activarea JavaScript-ului pentru a o vizualiza
Company Website: honey-ukraine.com, uventa.co.ua